35 Fire Pit Thermocouple Thermocouple for Gas Fireplace Replacement Parts SMAD

  
35 Fire Pit Thermocouple Thermocouple for Gas Fireplace Replacement Parts SMAD. The Universal Thermocouple Total Length 600mm. End Nut size to connect valve: M81. Voltage: 20mV, Open valve time less than 10s. Used for gas fireplace, fire pit, grill, Stove, catering cooker, patio heaters etc. We are uniquely positioned to serve the repair parts needs of RVing families, whether it's while. Enjoying weekends outdoors in a small trailer or traveling full time in a custom coach. Growing line of repair parts and expert customer service provides the security of a trusted. Established name to turn to when repair parts are needed. Fit for all brands of gas refrigerator, such as DometicSmadDiamondUnique, etc.

Installing 098514-01 and other similar thermocouple kits. Turn gas off to appliance.

Remove front panel from heater by removing the screws holding front panel to the cabinet. Remove thermocouple wire from gas valve base by turning counter clockwise with a 5/16 wrench (see Figure 1). Locate the pilot assembly and, with a Phillips screwdriver, remove screw that holds the bracket for the thermocouple and igniter (see Figure 2).

Remove thermocouple and replace with new thermocouple. Replace bracket and tighten screw. Finger tighten thermocouple wire at base of gas valve. With 5/16 wrench, turn 1/4 turn clockwise. Replace front panel on heater.

Turn gas on to appliance. Figure 1: Thermocouple Connection to Gas Valnes.

The item "35 Fire Pit Thermocouple Thermocouple for Gas Fireplace Replacement Parts SMAD" is in sale since Wednesday, July 21, 2021. This item is in the category "Home & Garden\Home Improvement\Heating, Cooling & Air\Heating & Cooling\ Parts & Accessories\Thermocouples & Thermopiles". The seller is "kipperbigseller09" and is located in Bell, California. This item can be shipped to United States.

• Model: RDO
• Type: Universal Thermocouple
• MPN: RDO-7H8F
• Item Length: 35 "
• Item Weight: 0.25 lb
• Brand: SMAD