NOTE: Some models use a 4 3/4" fan paddle and some use a 5" fan paddle. We have listings for both. Please check your current fan paddle size prior to ordering.
Terminal End Connectors - Please Note: Some Quadra-Fire models have a molex connector on the original fan. We do send additional terminal end connectors with this motor kit. If your model has a molex connector, you will simply snip that off and place the provided terminal end connectors on the lead wires going to the motor. Any questions we are happy to assist. 120V AC, 60Hz, 1.75 AMPS.
5/16 Diameter x 1 13/16 Length Shaft. Top of the Line Needle Point Ball Bearing Motor - Exceeds all OEM and aftermarket standards. Over 25 years of trusted value and commitment to our customers.
Note: You will need to remove the old combustion fan paddle and place the new fan paddle on the new motor once installed into the old housing. Using heat and/or lubricant is recommended in removing the old combustion fan paddle blade. The item "QuadraFire Combustion Exhaust Fan Motor + 4 3/4 812-3381, 812-4400 AMP-UNIVCOMB" is in sale since Monday, November 20, 2017. This item is in the category "Home & Garden\Home Improvement\Heating, Cooling & Air\Fireplaces & Stoves\Replacement Parts". The seller is "esesstoves" and is located in Dale, Wisconsin.
This item can be shipped worldwide.