There is a thermoelectric module on the fan, which acts as a small generator to drive the motor of the fan. The current is generated when the generator module experiences the thermal difference between the top and bottom surfaces. The bottom of the fan heats the bottom surface of the module, while the top of the module is kept cool by the top heat sink of the fan.As long as it is placed on the burning stove, it will absorb heat energy to drive the fan to rotate, so as to directly blow the hot air above the wood burning fireplace to the living area, increase the air circulation in the room, and improve the heating efficiency of the stove. The rotation speed of the fan depends on the temperature of the wood burning furnace. The higher the temperature of the furnace, the faster the rotation speed. When the furnace temperature is low enough to extinguish the fire, the rotation speed will slow down until it stops. Place the furnace fan on the smooth and flat surface of the furnace top, close to the side or back of the chimney. The furnace fan is designed for stove, and the furnace surface temperature is between 65? Temperatures above this range may damage the fan and generator set. To save fuel, the fan distributes heat from the furnace to provide better fuel efficiency. Self generating - no plug - no battery.
Self start, speed regulation and stop. Operating temperature: 60-350 ° c. Due to various factors such as monitor brightness and light brightness, the actual color of the product may be slightly different from the picture displayed on the website.
Please allow for slight manual measurement bias in the data. Also, the each additional item means.
The the same color and size. Transit time may be a little delayed because of the. If you have any questions. This item is in the category "Home & Garden\Home Improvement\Heating, Cooling & Air\Fireplaces & Stoves\Fireplace & Stove Accessories".
The seller is "motorsister" and is located in this country: CN. This item can be shipped worldwide.