Fireplace Replacement Parts

Englander PU-076002B Combustion Blower With Housing, AMP 20061

Englander PU-076002B Combustion Blower With Housing, AMP 20061

Englander PU-076002B Combustion Blower With Housing, AMP 20061    Englander PU-076002B Combustion Blower With Housing, AMP 20061
Englander PU-076002B Combustion Blower With Housing, AMP 20061. Combustion Exhaust Blower for Englander Stoves: PU-076002B The combustion exhaust blower delivers a steady stream of forced air (negative draft) through the stove in order to keep the flame burning, while allowing you to set your heat range to your desired comfort level. Our pellet stove exhaust blower comes with the complete assembly with gasket and pipe adaptor, and mounts securely in place of your existing blower. This blower comes with everything you need for installation including wire leads that make installation a breeze. This replacement exhaust blower is not compatible with Englander model 25-PUF or the Englander 10-CPM multi-fuel stove, so make sure to check your stove's model number before ordering. Combustion Exhaust Blower Features 85 CFM Blower Replaces existing combustion exhaust blower on Englander pellet stoves Complete assembly with gasket and pipe adapter included Includes wire leads for fast "plug and play" installation Includes detailed step-by-step installation instructions Not compatible with Englander model 25-PUF or 10-CPM multi-fuel stove Includes pipe adapter (adapter was formerly Part # CA-1598). Instructions For Replacing The Blower To replace the Combustion (exhaust) Blower (Part # PU-076002B), the power leads and the pellet vent pipe must be disconnected. Next, remove the screws that hold the blower to the steel exhaust tube and slide the blower from the stove. Note: There is a Combustion Motor Gasket (Part # PU-CMG), which allows you to remove the motor from the Combustion Blower housing, clean your stove, and replace the motor and gasket without having to remove the entire Combustion Blower.

If cleaning your blower, the blower impeller, blower tube and steel blower exhaust tube on the unit should be brushed and vacuumed. However, if you must remove or replace the entire Combustion Blower, a new blower flange gasket (Part # PU-CBG) should be added between the blower flange and the steel exhaust tube.

After Market Version, Includes Gasket and Wire , 85 CFM, Englander Combustion /Exhaust Blower, Fits most Englander Pellet Stove models, WILL NOT FIT Model 25-PUF or the 10-CPM multi-fuel stove. Combustion Exhaust Blower for Englander Stoves. The combustion exhaust blower delivers a steady stream of forced air (negative draft) through the stove in order to keep the flame burning, while allowing you to set your heat range to your desired comfort level. Replaces existing combustion exhaust blower on Englander pellet stoves. Complete assembly with gasket and pipe adapter included.

Includes wire leads for fast "plug and play" installation. Includes detailed step-by-step installation instructions.

Not compatible with Englander model 25-PUF or 10-CPM multi-fuel stove. Includes pipe adapter (adapter was formerly Part # CA-1598). Instructions For Replacing The Blower. To replace the Combustion (exhaust) Blower (Part # PU-076002B), the power leads and the.

Pellet vent pipe must be disconnected. Next, remove the screws that hold the blower to the steel. Exhaust tube and slide the blower from the stove. Note: There is a Combustion Motor Gasket.

(Part # PU-CMG), which allows you to remove the motor from the Combustion Blower housing, clean. Your stove, and replace the motor and gasket without having to remove the entire Combustion.

If cleaning your blower, the blower impeller, blower tube and steel blower exhaust tube on. The unit should be brushed and vacuumed. However, if you must remove or replace the entire.

Combustion Blower, a new blower flange gasket (Part # PU-CBG) should be added between the. Blower flange and the steel exhaust tube. Englander:, 25-PDV, 25-PDVC, 25-PDVE, 25-PI, 25-EP, 25-EPI, 25-PAH, 25-IP, 25-IPM, 25-IPS, 25-PAF, 55-SHP22,55-SHP20,55-TRP22,55-TRP20,55-SHP22L, 55-SHP10, 55-SHP10L, American Standard, American Heritage, 55-TRP10,55-SHPEPI, 55-SHPEP, 55-TRPEPI, 55-TRPEP, 55-SHPEPIL, 55-SHPEPL, 55-SHPEP, 55-SHPAH, 55-SHPAHL, 55-TRPAH, 55-SHPIP, 55-SHPIPL, 55-SHPIPM, 55-SHPIPS, 55-TRPIP, 55-TRPIPM, 55-TRPIPS, 55-SHP15, 55-SHP25, 55-TRP25.

Volts:115, Cycles:60 Hz, Amps:0.28, Rpms:3000. No additional information at this time. Need to return an item? 2 Alumininum Flex Pipe For outside air venting only, 10FT. 2 Aluminum Flex Pipe For outside air venting only, 5FT.

3" x 6" Dura-Vent Pellet Vent Pro Straight Length Pipe. The item "Englander PU-076002B Combustion Blower With Housing, AMP 20061" is in sale since Monday, August 20, 2018. This item is in the category "Home & Garden\Home Improvement\Heating, Cooling & Air\Fireplaces & Stoves\Replacement Parts". The seller is "stove-parts-4-less" and is located in North Falmouth, Massachusetts. This item can be shipped to United States.

  • Brand: Englander
  • Bullets: After Market Version,Includes Gasket and Wire ,85 CFM, Englander
  • MPN: PU-076002B


Englander PU-076002B Combustion Blower With Housing, AMP 20061    Englander PU-076002B Combustion Blower With Housing, AMP 20061